EN10
4 Use your
SoundBar
This section helps you use the SoundBar to
play audio from connected devices.
Before you start
• Make the necessary connections
described in the Quick Start Guide or
download the User Manual from
www.philips.com/support.
• Switch the SoundBar to the correct
source for other devices.
Adjust the volume
1
Press +/- (Volume) to increase or
decrease a volume level.
• To mute sound, press .
• To restore the sound, press
again or press +/- (Volume).
Volume indicator
• When you press the volume+ to
increase the volume, the SoundBar's
indicator will blink red, and the volume
will return to the normal state after
it reaches the maximum with the
SoundBar's indicator showing solid red
for 2 seconds.
• When you press the volume- to
decrease the volume, the SoundBar's
indicator will blink red, and the volume
will return to the normal state after
it reaches the minimum with the
SoundBar's indicator showing solid red
for 2 seconds.
MP3 player
Connect your MP3 player to play your
audio files or music.
What you need
• An MP3 player
• A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUX IN
connector on your SoundBar
2
Press AUX on the remote control.
3
Press the buttons on the MP3 player
to select and play audio files or music.
To Next Page
Loading...
