Philips TAB5305 - Understanding Your SoundBar; Remote Control Functions

EN 5
2 Your SoundBar
Congratulations on your purchase, and
welcome to Philips! To fully benefit from
the support that Philips offers, register your
SoundBar at www.philips.com/welcome.
Main unit
This section includes an overview of the
main unit.
Volume -
Decrease volume.

Volume +
Increase volume.

(SOURCE)
Select an input source for the soundbar.
Switch the soundbar on or to standby.
Soundbar's LED indicator
• Light up red when the soundbar is
in standby.
• Light up green when you switch to
AUX in input source (3.5mm stereo
audio cable).
• Light up blue when you switch to
Bluetoothmode and Bluetooth
devices are paired.
• Light up yellow when you switch
to optical input source.
• Light up purple when you switch
to HDMI (ARC) imput source.
• Blink red when you increase or
decrease volume, solid red when
you maximize or minimize volume.
• Blink red at a low rate when you
mute the soundbar.

Remote sensor
Soundbar's LED indicator
• Blink red before it is connected
with the SoundBar.
• Solid green when it is successfully
connected with the SoundBar.
Remote control
This section includes an overview of the
remote control.