Philips TAB5305 - Connectivity and Setup; SoundBar Connectors

EN6
(Standby-On)
• Switch the SoundBar on or to
standby.

Volume +
• Increase volume.

• Skip to the previoustrack in
Bluetooth mod.
Play buttons
• : Play, pause or resume play in
Bluetooth mode.

BT/PAIR
• Press to switch to the Bluetooth
mode.
• Press and hold to the disconnect
the currently connected Bluetooth
device and start a new pairing.
EQ
Select Music, Movie or News mode
• Music: The LED indicator on
Soundbar blinks white for 3
seconds.
• Movie: The LED indicator on
Soundbar blinks green light for 3
seconds.
• News: The LED indicator on
Soundbar blinks red for 3 seconds.
AUX
• Switch your audio source to the
AUX connection.

• Mute or restore volume.

• Skip to the next track in Bluetooth
mode.

Volume -
• Decrease volume.
HDMI (ARC)
• Switch your audio source to the
HDMI (ARC) connection.
OPTICAL
• Switch your audio source to the
optical connection.
Connectors
This section includes an overview of the
connectors available on your SoundBar.
HDMI (ARC)
Connect to the HDMI input on the TV.

SERVICE
For software upgrade.

AUX IN
Audio input from, for example, an
MP3 player (3.5mm jack).

OPTICAL
Connect to an optical audio output
on the TV or a digital device.

DC IN
Connect the soundbar to the power
supply.
AC IN
Connect the Subwoofer to the power
supply.