EN12
5 Wall mount
Note
• Improper wall mounting may result in
accident, injury or damage. If you have
any query, contact Consumer Care in your
country.
• Before wall mounting, make sure the wall
can support the weight of your SoundBar.
Screw length/diameter
Depending on the type of wall mounting
your SoundBar, make sure that you use
screws of a suitable length and diameter.
3.0-3.5mm/0.12"-0.14"
>25mm/0.98"
4mm/
0.16"
See the illustration in the quick start guide
on how to wall mount the SoundBar.
1) Drill two holes on the wall.
2) Secure the dowels and screws in the
holes.
3) Hang the SoundBar on the fastening
screws.
6 Product
specifications
Note
• Specifications and design are subject to
change without notice.
Amplifier
• RMS total output power:
70W RMS (+/- 0.5 dB, 10% THD)
• Frequency response: 50 Hz-15 kHz /
±3 dB
• Signal-to-noise ratio:
> 65 dB (CCIR) / (A-weighted)
• Total Harmonic Distortion: <1%
• Input sensitivity:
• LINE IN: 500 mV +/-50 mV
Bluetooth
• Bluetooth profiles: A2DP, AVRCP
• Bluetooth version: 4.2
• Frequency band/Output power:
2402 - 2480 MHz /
≤
20 dBm
To Next Page
Loading...
