EasyManua.ls Logo

Philips TAB7207/10 - Remote control not working

Philips TAB7207/10
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20 EN
• The device is not correctly connected.
Connect the device correctly.
• The soundbar is already connected with
another Bluetooth device.
Disconnect the connected device, and
then try again.
Quality of audio play from a connected
Bluetooth device is poor.
• The Bluetooth reception is poor. Move
the device closer to the soundbar, or
remove any obstacle between the
device and the soundbar.
I can’t �nd the Bluetooth name of this
unit on my Bluetooth device.
• Ensure the Bluetooth function is
activated on your Bluetooth device.
• Re-pair the unit with your Bluetooth
device.
Remote control does not work.
• Before you press any playback control

• Reduce the distance between the
remote control and the unit.
• Insert the battery with its polarities (+/-)
aligned as indicated.
• Replace the battery.
• Aim the remote control directly at the
sensor on the front of the unit.
The soundbar turns off.
• When the unit’s external input signal

automatically in 15 minutes. Please
increase the volume level of your
external device.
The subwoofer is idle or the indicator of
subwoofer does not light up.
• Please unplug power cord from the
mains socket, and plug it in again after
3 minutes to reset the subwoofer.