User Guide
48
Using the Power Features
Selecting IR to Operate your Devices
1Tap and hold the Pronto NG icon in the upper left corner of the
touch screen for 3 seconds.
The Tools Menu appears.
2Tap in the Tools Menu.
The ‘RF IR Tool’ screen appears.
3Tap .
The Device Overview appears.
4Tap the Device for which you want to select IR.
The ‘Select IR or RF’ screen appears. RF is selected in the Sending Signals list.
5 Choose IR in the Sending Signals list.
The ‘Define RF’ button is disabled.
6Tap in the ‘Select IR or RF’ screen.
Pronto NG will send out IR signals for the selected device.
To Next Page
Loading...
