Philips VideoPlus DVDR75 - Connecting Audio Devices to the Digital Audio Socket

21
Connecting audio devices to the digital
audio socket
At the back of the DVD recorder there is a digital audio output socket DIGITAL AUDIO
OUT for an coaxial cable.
These can be used to connect the following:
•) an A/V receiver or an A/V amplifier with a digital multichannel sound decoder
•) a receiver with twochannel digital stereo (PCM)
Digital multichannel sound
Digital multi-channel sound offers the best possible sound quality. You will
need a multi-channel A/V receiver or amplifier that supports at least one of
the audio formats of the DVD recorder (MPEG2 and Dolby Digital).
Consult the operating instructions for your receiver to find out which audio
formats it supports.
?
a All I can hear from my loudspeakers is a loud distorted noise
b The receiver is not compatible with the digital audio format of the DVD
recorder. The audio format of the DVD disc is displayed in the status
window when you switch to anoter language. Playback in six-channel digital
surround sound is only possible if the receiver has a digital multi-channel
sound decoder.
Problem
ENGLISH
Connecting additional devices