Philips VR675/05 - Manual channel search; Manual Channel Number Allocation

11
Manual channel search
In certain cases the Automatic Channel Search may not be
able to find all of the TV channels (e.g. coded TV channels).
You can then use this manual method to set the channels.
1 Press the
AUTOINSTALL
button on the video recorder.
2 Select and confirm ’MANUAL SEARCH’ .
3 Hold the
P q
button until you have found the right TV
channel. A changing channel number or frequency will
appear on the TV screen.
4 Confirm with the
OK
button.
5 Select and confirm the programme number that you wish
to allocate to this TV channel (e.g.: ’P 01’ ).
6 If you want to allocate more TV channels, repeat
steps 3to 5until all TV channels have been stored.
7 To end, press the
STANDBY m
button.
Note: Channel number or frequency can also be entered
directly at step 3, using the
0-9
buttons.
* To enter a special/hyperband channel, first enter the
channel digit ’9’. The indication changes from ’CH’ to
’CA’. For example, for special channel ’S 30’, enter ’9 30’.
* Allocating a decoder: If you want to allocate a
decoder, press the
INDEX E
button at step 3until
’DEC’ appears in the display.
* This video recorder can receive HI-FI sound transmis-
sions in ’NICAM’. At step 3, you can switch ’NICAM’
off or on with the
SELECT
button.
Manual Channel Number Allocation
You can allocate any desired programme number to the TV
channels stored by the ’Automatic Channel Search’.
1 Press the
AUTOINSTALL
button.
2 Select and confirm ’CHANNEL ALLOCATION’ .
3 Use the
P r
or
P q
button, to select the TV channel
on the TV screen, to which you wish to allocate a
programme number (starting with ’P 01’ ).
4 Confirm this allocation.
If you wish to allocate further programme numbers,
repeat step 3and step 4until you allocated a pro-
gramme number to all the required TV channels.
5 To end press the
STANDBY m
button.
Note: If you want to delete an unwanted TV channel,
press the
CLEAR (CL)
button at step 3.
* Monitor function: You can switch to and fro between
TV reception and video recorder reception with the
MONITOR
button. This only functions when you used a
scart cable to connect the video recorder to your TV set
and if your TV set responds to this switch-over.