Phoenix Contact 2904601 User Manual

1Description
Power supply unit
QUINT4-PS/1AC/24DC/10
© PHOENIX CONTACT
Data sheet
QUINT POWER power supplies with SFB Technology and
preventive function monitoring ensure superior system
availability.
Powerful
– SFB technology: 6 times the nominal current for 15ms
– Power reserves:
Static boost of up to 125%(P
N
) for a sustained period
Dynamic boost of up to 200%(P
N
) for 5s
Robust
–Mains buffering ≥ 20ms
– High degree of electrical immunity, thanks to integrated
gas-filled surge arrester (6kV)
Preventive
– Comprehensive signaling:
Analog signal, digital signal, relay contact, LED bar
graph
Can be ordered pre-configured
– Perform configuration online and order 1 or more units
Technical data (short form)
Input voltage range 100 V AC ... 240 V AC
-15% ... +10%
Mains buffering ≥ 35 ms (120 V AC)
≥ 35 ms (230 VAC)
Nominal output voltage (U
N
) 24 V DC
Setting range of the output voltage
(U
Set
)
24 V DC ... 29.5 V DC
Nominal output current (I
N
)
Static Boost (I
Stat.Boost
)
Dynamic Boost (I
Dyn.Boost
)
Selective Fuse Breaking (I
SFB
)
10 A
12.5 A
20 A (5 s)
60 A (15 ms)
Output power (P
N
)
Output power (P
Stat. Boost
)
Output power (P
Dyn. Boost
)
240 W
300 W
480 W
Efficiency typ. 92.5 % (120 V AC)
typ. 93.4 % (230 V AC)
Residual ripple < 80 mV
PP
MTBF (IEC 61709, SN 29500) > 783000 h (40 °C)
Ambient temperature (operation) -25 °C ... 70 °C
-40°C (startup type tested)
> 60 °C Derating: 2.5 %/K
Dimensions W/H/D 50 mm / 130 mm / 125 mm
Weight 0.9 kg
All technical specifications are nominal values and refer to a room temperature of 25 °C and 70 % relative
humidity at 100 m above sea level.
107100_en_01
2018-09-03

Phoenix Contact 2904601 Specifications

General

Output Voltage	24 V DC
Nominal Output Voltage	24 V DC
Mounting Type	DIN Rail
Degree of Protection	IP20
Input Voltage	100 V AC to 240 V AC
Mounting Position	Horizontal
Operating Temperature	-25 °C ... 70 °C (observe derating)

Summary

Description

Powerful Features

Highlights SFB technology and boost capabilities for enhanced performance.

Robust Design

Details mains buffering and high electrical immunity for system reliability.

Technical Data Summary

Detailed Technical Specifications

Input Data Overview

Covers voltage ranges, frequency, and typical current draw.

Input Protection and Electric Strength

AC Input Protection Options

Details upstream protection options for AC input.

Insulation Strength Values

Specifies dielectric test values for electrical safety.

Connection Data

Output Data Summary

Covers voltage, current, and performance characteristics.

Output and Signal Connections

Configurable Signal Contacts

Covers configuration of digital and analog signal outputs.

Reliability and General Information

Reliability Metrics

Provides MTBF and component life expectancy data.

Environmental and Standard Compliance

Ambient Conditions

Details operating temperature, humidity, and installation height.

Applicable Standards

Lists compliance with safety and EMC standards.

Electromagnetic Compatibility (EMC)

Noise Emission Standards

Covers compliance with noise emission regulations.

Immunity Standards Overview

Details compliance with various immunity standards.

Specific Immunity Standards

Surge Voltage Load (EN 61000-4-5)

Details surge immunity requirements.

Conducted Interference (EN 61000-4-6)

Covers conducted interference immunity.

Voltage Dips (EN 61000-4-11)

Explains behavior during voltage dips.

Additional EMC Compliance Details

Pulse-Shape Magnetic Field (EN 61000-4-9)

Damped Oscillating Magnetic Field (EN 61000-4-10)

Asymmetrical Conducted Disturbances (EN 61000-4-16)

Safety and Installation Guidelines

General Safety Precautions

Provides essential warnings for handling and installation.

High-Voltage Testing (HIPOT)

High-Voltage Dielectric Test Procedure

Mounting and Removal Procedures

Mounting the Power Supply Unit

Removing the Power Supply Unit

Output Characteristic Curves

U/I Advanced Curve

Default characteristic for general operational use.

Smart HICCUP Curve

Handles overloads with controlled shutdown behavior.

FUSE MODE Curve

Provides fuse-like tripping behavior for protection.

Configuring the Power Supply

PC Software Configuration

Mobile Device Configuration

Boost Current Capabilities

Static Boost Functionality

Dynamic Boost Functionality

Explains temporary high load capability.

SFB Technology

Tripping Circuit Breakers

Tripping Fuses

Signaling Overview

Signaling Elements Location and Function

Preventive Function Monitoring

Detailed Signal Descriptions

Voltage and Current Monitoring Signals

Fault and Warning Signals

Characteristic Curve Signaling

U/I Advanced Signaling Assignments

Default signal assignments for the U/I Advanced curve.

SMART HICCUP Signaling Assignments

Signal assignments for the SMART HICCUP curve.

Mode-Specific Signaling

FUSE MODE Signaling Assignments

Signal assignments for the FUSE MODE curve.

SLEEP MODE Signaling Status

Operating Modes

Series Operation Configuration

Parallel Operation Configuration

Redundancy Operation Configuration

Connecting units for increased reliability.

Increased Power Configuration

Derating Guidelines

Ambient Temperature Derating

Details power reduction due to high temperatures.

Position-Dependent Derating

Normal Mounting Position Derating