Phoenix Contact QUINT4-PS/1AC/24DC/10 User Manual

1Description
Power supply unit
QUINT4-PS/1AC/24DC/10
© PHOENIX CONTACT
Data sheet
QUINT POWER power supplies with SFB Technology and
preventive function monitoring ensure superior system
availability.
Powerful
– SFB technology: 6 times the nominal current for 15ms
– Power reserves:
Static boost of up to 125%(P
N
) for a sustained period
Dynamic boost of up to 200%(P
N
) for 5s
Robust
–Mains buffering ≥ 20ms
– High degree of electrical immunity, thanks to integrated
gas-filled surge arrester (6kV)
Preventive
– Comprehensive signaling:
Analog signal, digital signal, relay contact, LED bar
graph
Can be ordered pre-configured
– Perform configuration online and order 1 or more units
Technical data (short form)
Input voltage range 100 V AC ... 240 V AC
-15% ... +10%
Mains buffering ≥ 35 ms (120 V AC)
≥ 35 ms (230 VAC)
Nominal output voltage (U
N
) 24 V DC
Setting range of the output voltage
(U
Set
)
24 V DC ... 29.5 V DC
Nominal output current (I
N
)
Static Boost (I
Stat.Boost
)
Dynamic Boost (I
Dyn.Boost
)
Selective Fuse Breaking (I
SFB
)
10 A
12.5 A
20 A (5 s)
60 A (15 ms)
Output power (P
N
)
Output power (P
Stat. Boost
)
Output power (P
Dyn. Boost
)
240 W
300 W
480 W
Efficiency typ. 92.5 % (120 V AC)
typ. 93.4 % (230 V AC)
Residual ripple < 80 mV
PP
MTBF (IEC 61709, SN 29500) > 783000 h (40 °C)
Ambient temperature (operation) -25 °C ... 70 °C
-40°C (startup type tested)
> 60 °C Derating: 2.5 %/K
Dimensions W/H/D 50 mm / 130 mm / 125 mm
Weight 0.9 kg
All technical specifications are nominal values and refer to a room temperature of 25 °C and 70 % relative
humidity at 100 m above sea level.
107100_en_01
2018-09-03

Phoenix Contact QUINT4-PS/1AC/24DC/10 Specifications

General

Brand	Phoenix Contact
Model	QUINT4-PS/1AC/24DC/10
Category	Power Supply
Language	English

Summary

Product Overview and Ordering

Description and Key Features

Details the QUINT POWER supply's powerful, robust, and preventive features, including SFB technology and signaling.

Ordering Information

Provides product ordering details and lists available accessories for system enhancement.

Technical Specifications

Input and Output Parameters

Specifies input voltage/current, output voltage/current, boost capabilities, and efficiency.

Connection and Wiring Data

Details input/output connection methods, conductor sizes, stripping length, and tightening torque.

Electrical Safety, Standards, and Approvals

Outlines insulation tests, safety standards (IEC, EN), and approvals (UL, CSA).

Installation, Operation, and Configuration

Safety and Installation Guidelines

Covers essential safety precautions, hazardous voltage warnings, and installation best practices.

Mounting and Removal Procedures

Provides step-by-step instructions for mounting and removing the power supply from DIN rails and wall adapters.

Output Characteristic Curves

Explains U/I Advanced, Smart HICCUP, and FUSE MODE curves for application customization.

Configuring the Power Supply

Details methods for configuring the power supply via PC software or NFC-capable mobile devices.

Advanced Functionality and Performance

Boost Currents and SFB Technology

Explains static/dynamic boost currents and SFB technology for selective fuse breaking.

Signaling and Preventive Monitoring

Describes signal outputs, LEDs, and preventive function monitoring for system status.

Operating Modes and Derating

Covers series, parallel, redundancy operation, and derating factors affecting output power.