Phoenix Contact FL SWITCH 2008F - Fl Switch 2708 Pn

FL SWITCH 2000 / FL NAT 2000
210 / 226
PHOENIX CONTACT 108997_en_04
5.64 FL SWITCH 2708 PN
Conformity with EMC directives
Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Conducted noise emission EN 61000-6-3 (conducted emissions) Class B
Interference emission EN 61000-6-3 (conducted emissions) Class B
Immunity to burst EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A
Immunity to EF EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion
A
Immunity to ESD EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B
Immunity to surge EN 61000-6-2 EN 61000-4-5 (surge) Criterion B
Immunity to conducted interference EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A
Ordering data
Order designation FL SWITCH 2708 PN
Order No. 1106610
Pcs./Pkt. 1
Dimensions (nominal sizes in mm)
Width 60 mm
Height 226 mm
Depth 46 mm
Ambient conditions
Degree of protection IP65/IP66/IP67
Protection class III (VDE0106)
Ambient temperature (operation) -40 °C ... 70 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 5 % ... 95 %
Permissible humidity (storage/transport) 5 % ... 95 %
Air pressure (operation) 79 kPa ... 108 kPa up to 2000m above mean sea level (Without
derating)
Air pressure (storage/transport) 79 kPa ... 108 kPa up to 2000m above mean sea level (Without
derating)
Free from substances that could impair the application of
coating
Yes
General data
Mounting type Wall mounting
Type AX Stand-alone
Weight 1150 g
Housing material Zinc die-cast