Phoenix Auto Equipment
-Address: 2711 East Craig Road Ste #E, North Las Vegas, NV, 89030 United States
- Website: https://www.phoenixautoequipment.com
- Phone: 7025802883
13 / 24
6.2 Input 4 Parameters of Wheel with Automatic Gauge
In ALUS mode, pull the gauge against the
chosen correction plane on the inside of
the rim, press to automatically input.
Now A1 value is displayed on the left of
the screen
Do not return the gauge and keep pulling
the gauge until it is against the chosen
correction plane on the outside of the
rim, waiting…..
Now AE value is displayed on the right
side of the screen.
After the outside measurement, return
the gauge to position 0 and ALUS
parameters input finished.
To Next Page
Loading...
Need help?
General