Phoenix Auto Equipment
-Address: 2711 East Craig Road Ste #E, North Las Vegas, NV, 89030 United States
- Website: https://www.phoenixautoequipment.com
- Phone: 7025802883
5 / 24
2. Product Specification
Rim Diameter 10"-28"
Rim Width 1.5"-20"
Maximum wheel weight 155 lbs.
Cycle Time 8 seconds
Power supply 110v/1ph
+ or - 1 gram of accuracy
Oz/Gram switch
Standard Dynamic Mode, Static Mode, ALU 1-3 Mode, ALUS
Mode, Motorcycle Mode.
Self -calibrate function and Easy maintenance
includes free truck cone adapter set
includes plastic hood and quick release wing nuts
includes all accessories shown in the pictures
Gray power coat finish
Oversize 40mm Shaft and laser guide device indicated spot
where the weight attached on.
3. Product Installation
Remove Wheel Balancer from shipping crate and pallet.
Place Wheel Balancer on flat and stable floor.
Install the Safety hood.
Install threaded rod to spin rod extruding from side of the
machine using the hex bolt.
If Wheel Balancer shakes or moves while spinning the wheel, it
needs to be bolted to the ground to ensure proper function.
Electrical plug is preinstalled to fit North American 110 volt
electrical socket. Plug into proper electrical socket. Do not
hard wire directly to your electrical source. There is no power
To Next Page
Loading...
Need help?
General