Phoenix Auto Equipment
-Address: 2711 East Craig Road Ste #E, North Las Vegas, NV, 89030 United States
- Website: https://www.phoenixautoequipment.com
- Phone: 7025802883
22 / 24
13. Motorcycle Mode
Motorcycle mode requires a special motorcycle adapter to mount the
wheel to the machine. This adapter can be purchased separately as is it
is not included with the wheel balancer.
To balance a motorcycle wheel, enter the 3 parameters and complete
the balance process just like in dynamic mode.
14. Errors and Trouble Shooting
Error Meaning Solution
ccc ccc
The result of
measurement is
beyond the range.
The user did one of the
following: the user
attempted to calibrate
machine but did not
add wheel weights. The
user placed a wheel
that is either too light
or too heavy for the
machine.
OFF OFF
Machine gives this
prompt when the STOP
button is pressed while
a wheel is spinning
Err 01
The guard was not
closed when
attempting to spin a
wheel or the user
raised the guard while
Use the system settings
to turn guard control to
OFF. Do not raise or
lower the guard while
wheel is spinning.
To Next Page
Loading...
Need help?
General