Detect paper's sensor
error
Allow the printer to cool, once
cool, it will automatically
resume printing.
Download "Diagnostic Tool"
from www.phomemo.com,
double-click LabelPrinter
Tool->"Set Printer"->"Location"
Tab, click "Learn" at Lack paper
learn.
•l Buzzzer Status
Buzzer
2 "Beeps"
at a times
3 "Beeps"
at 3 times
5 "Beeps"
at a times
6 "Beeps"
at a times
7 "Beeps"
at a times
8 "Beeps"
at a times
Printer status
Detect paper's sensor
error
Paper shortage
The Printhead is
overheated
Cover is not closed
Wrong media tracking:
used the label has not
gaps
Wrong media tracking:
used the label has not
black line
Troubleshooting
Download "Diagnostic Tool"
from www.phomemo.com,
double-click LabelPrinter
Tool->"Set Printer" Location "
Tab, click "Learn" at Lack paper
learn.
Be sure the printer paper is
loaded correctly.
(See Automatic identification
of label size)
Allow the printer to cool, once
cool, it will automatically
resume printing.
Check that the cover is
completely closed.
Be sure the label type and
computer settings are the same.
(See automatic identification
of label size)
Note: It is not necessary to turn off the printer for these errors. After trouble
shooting it should continue to work.
07
To Next Page
Loading...
