Phomemo PM-246S - Page 7

Feed Button Mode
Desired Action
Skip a label
Restorefactory
setting
Automatic
identification of the
label size
(Execution for labels
that are separated by
black lines or marks)
Automatic
identification of the
label size
(Execution for labels
that are separated by
gaps)
Print out test page
Pauseprinting
Resumeprinting
Clearprinting data
Execution
Pressthe FeedButton while printer isstandby (i.e.nothing is being
printed).
While printer is standby, press and hold the Feed Button for 10 sec.
After the blue light flashes 4 times, then release the Feed Button.
While printer isstandby, press and hold the Feed Button for 7 sec.
After the blue light flashes 3 times, then releasethe FeedButton.
*Anytime you change your label, run the automatic identification
of the label size.
While printer is standby, press and hold the Feed Button for 5 sec.
After the blue light flashes 2 times, then releasethe Feed Button.
><Anytime you change your label, run the automatic identification
of the label size.
While printer is standby, press and hold the Feed Button for 2 sec.
After the blue light flashes 1 times, then releasethe Feed Button.
Pressthe FeedButton while printing.
When printing is paused,pressthe Feed Button to resume printing.
When printing is paused, double-click the Feed Button to clear the
printing data.
06