Need help?Do you have a question about the Phonic MAX 3500 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Signal-to-Noise Ratio | >100 dB |
| Protection | Thermal, short circuit, DC protection |
| Connectors (Inputs) | XLR, 1/4" TRS |
| Connectors (Outputs) | Binding posts |
| Input Impedance | 20 kOhms balanced, 10 kOhms unbalanced |
| Frequency Response | 20Hz-20kHz (±0.5dB) |
| Input Sensitivity | 1V |
Emphasizes following instructions, using correct plugs, and not defeating safety features like polarization.
Defines requirements for qualified servicing and warns against exposure to rain, moisture, or hazardous radiation.
Explains the Grounding/Floating Switch for ground loop resolution and the Operation Mode Switch.
Details how to connect and operate the amplifier in parallel mode for dual mono output.
Covers bridge mono operation for maximum power, including wiring and impedance considerations.
To Next Page