"
Hook-up #2: Stereo PA and Monitors
Notes
1. Many guitar effects have a pre-amp stage built in. It is fine to serial effects between this and the mixer's
inputs. If the guitar rig outputs in stereo, treat the whole rig as you would a keyboard or synth input.
2. Narrow band graphic EQs can be inserted between the power amps and the mixer to reduce feedback. By
sliding down the frequencies with most tendency to feedback, the output level before feedback of the whole
system is increased. Graphic EQs are also useful for shaping the sound to the acoustics of a room, or for
purely aesthetic changes.
3. Inserts are typically used pre-fader for processing such as in this example.
To Next Page
Loading...
