“R”
Recording
This section is for users with an“R”version of the Powerpod. On these models, users will nd a USB port accompanied by a LCD and four
function buttons. Please see the operating instructions below:
Playback:
The USB player supports WAV, WMA, and MP3 playback
through USB.
1. Power on the device.
2. Insert an appropriately formatted (FAT32) USB ash drive.
3. On the main menu, select “Playback” and press the PLAY
button.
4. Press the PLAY button to play the current track, or the << and
>> buttons to skip forward and backwards between tracks.
5. Press the MENU button while in the Playback mode to access
the File Browser, Delete File, Repeat Mode and Volume
Control functions.
6. Press and hold the MENU button for three seconds to exit
playback mode and return to the main menu.
Folders - Freely navigate songs in each folder on USB ash disc
using the << and >> buttons. Press PLAY button to select, press
MENU button to go back.
Repeat Mode - There 4 repeat modes available.
No Repeat - Play each le in the current folder or root for once.
Repeat One - Constantly repeat selected song.
Repeat Folder - Constantly repeat all the song in the certain folder or root.
Random – Enables random playback of les in current folder or root.
Record:
Users can record high denition WAV format.
1. Power on the device.
2. Insert an appropriately formatted (FAT32) USB ash drive.
3. In the main menu, select “Record” and press the PLAY button
to enter recording mode.
4. Select between the 128kbit/s and 192 kbit/s WAV recording
modes and press PLAY button.
5. Record mode will begin in standby/pause. Push the Play/
Pause button to begin recording. The unit will save the
recorded le into the RECORD directory on the USB device.
6. Push the Play/Pause button to pause recording. Pushing
the Play/Pause button again will resume recording from the
position at which it was paused.
7. Press the MENU button at any time to save the recording.
Once the recording is saved, the system will automatically
skip to the next track.
8. To exit out of the playback mode and return to the main menu,
press and hold MENU button for three seconds.
NOTE:
1. The USB rotary control will adjust the playback level only and
will not affect recording levels. The only level controls that will
affect the recording level are those found on the individual in-
put channels.
2. Users may experience very short instances of drop outs during
playback of recorded WAV les.
To Next Page