Phonic POWERPOD 410 - Getting Started with Powerpod 410

4 POWERPOD 410
INTRODUCTION
Congratulations on your purchase of the Phonic
Powerpod 410 Powered Mixer. The Powerpod 410
is built into a rugged wooden cabinet for heavy-duty
use. In order to get the best performance from your
Powerpod 410, please read all of this safety and
operation manual before operating the mixers and
keep the manual for future reference.
FEATURES
 4 mono input channels for a wide range of
Microphone and Line level signals from separate
input sockets
 Built-in 100 watt power amplier (max. output)
 Built-in Digital Delay
 Super musical 2-band EQ at mono channels
 Record out
 Tape in with level control
GETTING STARTED
1. Before turning on the power, set the Master output
control to the off position.
2. Always turn the power off before connecting or
disconnecting cables.
3. Cleck the AC Voltage before connecting the AC
plug.
4. Do not obstruct the back panel at all for proper
ventilation.