Need help?Do you have a question about the Phonic POWERPOD1860 and is the answer not in the manual?
General| Type | Powered Mixer |
|---|---|
| Channels | 18 |
| Built-in Effects | Yes |
| Frequency Response | 20Hz - 20kHz |
| Other Outputs | Monitor |
| EQ Bands | 3-band EQ per channel |
| THD | <0.1% |
| Input Impedance | Mic: 2k ohms, Line: 10k ohms |
| Cooling | Fan |
| Protection | Short circuit |
| Inputs - Mic | XLR |
Shows the component layout for the Channel 1-8 PCB.
Displays the circuit layout for the Channel 1-8 PCB.
Circuit diagram for channels 1 through 4.
Circuit diagram for channels 5 through 8.
Shows component layout for channels 9-16 and master section.
Displays circuit layout for channels 9-16 and master section.
Circuit diagram for channels 9-10 and 11-12.
Second part of circuit diagram for channels 9-12.
Circuit diagram for channels 13 through 16.
Schematic for the tape input section.
Circuit diagram for the graphic equalizer.
Schematic for the effect return path.
Circuit diagram for the limiter function.
Circuit diagram for the headphone output.
Circuit diagram for the main outputs.
Circuit diagram for the level meter indicators.
Circuit diagram for Effect DSP section 1.
Circuit diagram for Effect DSP section 2.
Circuit diagram for Effect DSP section 3.
Circuit diagram for Effect DSP section 4.
Lists all parts for the Effect DSP PCB.
Schematic for the 7-segment LED display.
Part list for the effect control PCB.
Circuit diagram for power amp control.
Part list for the power amp control PCB.
Circuit diagram for the power supply.
Circuit diagrams for power amplifier channels 1 and 2.
Part list for power supply and amplifier PCB.
To Next Page