Phonic POWERPOD408 - Specifications

POWERPOD408 USER’S MANUAL
Specifi cations are subject to change without notice.
PHONIC CORPORATIONPage 12
SPECIFICATIONS
SPECIFICATIONS
Powerpod 408
POWER AMP, max. output power in watts
Number of Power channels 1
8Ω 52
4Ω 80
Inputs
Balanced mono Mic/Line channels 4
2T input 1
Outputs
Main out TRS, unbal.
Channel Strips 4
Volume Controls Rotary
Master Section
Rotary Fader Master
Built-in Digital Effect Digital Delay (2ms-150ms)
Noise (20Hz to 20KHz bandwidth, line inputs to
master output)
Master output, all faders down -86dBu
Power amp output, all faders down -52dBu
THD
Power output, 20Hz to 20KHz @40 watts, 4Ω <1%
Crosstalk (1KHz @ 0dBu, 20Hz to 20KHz
bandwidth, channel in to master output)
Channel fader down <-63dB
Frequency Response (Mic input to output)
20Hz ~ 20KHz, line level o/p @ +4dBu into 600Ω +1/-3dB
20Hz ~ 20KHz, power amp o/p 1 watt into 8Ω +1/-3dB
Sensitivity @ mixer output +4dBu
Mic/Line -50dBu/-35dBu
Tape in -6dBu
Channel Equalization 2-band, ±15dB
Low EQ 80Hz
Hi EQ 12KHz
Microphone Preamp E.I.N. (150 ohms
terminated, max. gain)
<-122dBm