Physio Logic Essentia+ - Starting and Conducting a Measurement

EssentiA
+
Instruction Manual
15
MEASUREMENT
Start the Measurement
1. Press and hold the START/STOP button
until a beep sounds. The LCD screen will
light up followed by a long tone which
indicates the device is ready for testing.
2. Initial pressure is first pumped to190mmHg.
The unit will automatically adjust to one of
four pressure levels based on the current
user’s blood pressure.
Levels: 190mmHg
220mmHg
250mmHg
280mmHg
mmHg
kPa
M
D
No
AVG
(
( )
)
mmHg
M
D