16
EssentiA
+
Instruction Manual
MEASUREMENT
NOTE
• It is recommended to wait at least 5 minutes
between measurements for accurate results.
• If unit is left ON and not in use for 3 minutes,
it will automatically save all information and
shut off.
Start the Measurement
3. Once inflated, the cuff will slowly
deflate and measure your blood
pressure. A flashing “ “ will
appear simultaneously on screen
signaling heart beat detection.
4. When testing is complete the monitor will
sound three short beeps. The screen will
display your systolic and diastolic blood
pressure. The reading will be automatically
stored in the selected memory zone.
5. To take another reading press the
“START/STOP“ button twice.
mmHg
kPa
M
D
No
AVG
(
( )
)
mmHg
M
D
START
STOP
SET M
To Next Page
Loading...
