26
EssentiA
+
Instruction Manual
Electromagnetic Compatibility Information
The device satisfies the EMC requirements of the international standard
IEC 60601-1-2. The requirements are satisfied under the conditions
described in the table below. The device is an electrical medical product
and is subject to special precautionary measures with regard to EMC
which must be published in the instructions for use. Portable and mobile
HF communications equipment can affect the device. Use of the unit in
conjunction with non-approved accessories can affect the device
negatively
and alter the electromagnetic compatibility. The device should not be used
directly adjacent to or between other electrical equipment.
Table 1
Guidance and declaration of manufacturer-electromagnetic emissions
The device is intended for use in the electromagnetic environment specified below.
The customer or the user of the device should assure that it is used in such
an environment.
Electromagnetic environment-guidance
ComplianceEmissions test
The device uses RF energy only for
its internal function. Therefore, its
emissions are very low and are not
likely to cause any interference in
nearby electronic equipment.
Group 1,
class B.
Radiated emission
CISPR 11
The device is suitable for use in all
establishments, including domestic
establishments and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic purposes.
Conducted emission
CISPR 11
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies
Group 1,
class B.
To Next Page
Loading...
