phytron
MA 1203-A010 EN 7
WARNING – Injury from touching the housing!
Stepper motors heat up during operation. The surface of the motor can be
heated over +100 °C.
- The motor must be mounted in such way that proper dissipation of
the generated heat is ensured.
- Wait until the stepper motor has completely cooled down.
- Ensure measures for contact protection
CAUTION – Possible damage!
The stepper motor's rotor is strongly magnetic. Metal or soft iron particles
penetrating through the large outgassing holes might damage motor func-
tion.
- Metal particles must be kept away from the motor.
CAUTION – Possible damage!
Foreign substances, dirt or humidity penetrating through the outgassing
holes could seriously damage motor function or cause breakdown.
- Do not touch the stepper motor with bare hands. Wear security
gloves
- Handle the in-vacuum stepper motor/cryo stepper motor only in a
very clean environment!
To Next Page
Loading...