PIAB piCOMPACT 23 SMART - 4.2.7 Valve Module and IO-Link Display

Installation
Manual piCOMPACT
®
23 SMART IO-Link Ready 2 channel Page 17/24
4.2.7 Valve module and IO-link ready display
Top view of pump:
Figure 9
V
A
B
L2
L1
Valve module.
Pos. Description Note
A Flow setting, Blow-Off Ømax = 3.7 [0.146”]
B* Manual override - Blow-Off valve, requires power to unit Push button to activate, push again to deactivate.
V* Manual override - Vacuum valve, requires power to unit Push button to activate, push again to deactivate.
L1 Indicator LED - Blue, Vacuum valve Lights only when activated from IO.
L2 Indicator LED - Green, Blow-Off valve Lights only when activated from IO.
*Override function for Automatic Condition
Monitoring (ACM). See the manual for your
configuration on www.piab.com for more information