PIAGGIO BEVERLY Cruiser 500ie User Manual

01_20
01_21
Identification (01_20, 01_21)
Identification registration numbers are made up of a prefix and a number stamped on
the chassis and on the engine. These numbers must always be quoted when ordering
spare parts. We recommend checking that the chassis registration number stamped
on the vehicle corresponds with that on the vehicle documentation.
CAUTION
BE REMINDED THAT ALTERING IDENTIFICATION REGISTRATION NUMBERS
CAN LEAD TO SERIOUS PENAL SANCTIONS (IMPOUNDING OF THE VEHICLE,
ETC.).
Chassis number
To read the chassis number, remove the lid «A» in the helmet compartment.
Engine number
The engine number «B» is stamped near the rear left shock absorber lower support.
01_22
Rear top box opening (01_22)
Insert the key into the switch and press down until the glove compartment opens. In
the event that the switch is in «LOCK», turn the key to «OFF» or «ON» before pressing
it.
20
1 Vehicle

PIAGGIO BEVERLY Cruiser 500ie Specifications

General

Displacement	492 cc
Cooling System	Liquid cooled
Fuel System	Electronic injection
Transmission	Automatic CVT
Front Suspension	Telescopic hydraulic fork
Rear Brake	240 mm disc
Rear Tire	150/70-14
Width	780 mm
Seat Height	790 mm
Top Speed	160 km/h
Engine Type	Single cylinder, 4-stroke
Rear Suspension	Double hydraulic shock absorber
Front Brake	260 mm disc
Front Tire	110/70-16