PIAGGIO BEVERLY Cruiser 500ie User Manual

CAUTION
FOR OIL REPLACEMENT, CONTACT ANY AUTHORISED SERVICE CENTRE AS
THEY ARE EQUIPPED TO DISPOSE OF USED OILS IN AN ENVIRONMENTALLY
FRIENDLY AND LEGAL WAY.
Recommended products
AGIP ROTRA 80W-90
Rear hub oil
SAE 80W/90 Oil that exceeds the requirements of API GL3 specifications
Characteristic
Transmission oil
250 cm³
03_07
Tyres (03_07)
Check tyre pressure and wear periodically as indicated in the scheduled maintenance
table. Tyres feature wear indicators; replace tyres as soon as these indicators become
visible on the tyre tread. Also check that the tyres do not show signs of splitting at the
side or irregular tread wear; if this occurs, go to an authorised workshop or at least to
a workshop equipped to perform the replacement.
CAUTION
TYRE PRESSURE SHOULD BE CHECKED WHEN TYRES ARE COLD.INCOR-
RECT TYRE PRESSURE CAUSES ABNORMAL TYRE WEAR AND MAKES RID-
ING DANGEROUS.
40
3 Maintenance

PIAGGIO BEVERLY Cruiser 500ie Specifications

General

Displacement	492 cc
Cooling System	Liquid cooled
Fuel System	Electronic injection
Transmission	Automatic CVT
Front Suspension	Telescopic hydraulic fork
Rear Brake	240 mm disc
Rear Tire	150/70-14
Width	780 mm
Seat Height	790 mm
Top Speed	160 km/h
Engine Type	Single cylinder, 4-stroke
Rear Suspension	Double hydraulic shock absorber
Front Brake	260 mm disc
Front Tire	110/70-16