- Remove the plate.
- Remove the camshaft.
- Remove the lock of the rockers to allow them to
slide on the pins to access the calibrated pads.
- Remove the calibrated pads
CAUTION
PROPERLY REPLACE THE PADS AND ROCKERS SO AS
TO PRESERVE THE COUPLINGS.
CAUTION
IF NECESSARY USE A TELESCOPIC MAGNET TO RE-
MOVE THE PADS, PAY PARTICULAR ATTENTION THAT
THEY DO NOT FALL IN THE TRANSMISSION HOUSING.
MP3 400 hpe E5 Engine
ENG - 89
To Next Page
Loading...
