- Restore the level of oil inside reduction unit with
the recommended product, acting on the filler
screw until touching.
- Tighten to the specified torque.
Recommended products
Transmission oil 80W-90 Lubricant for gear-
boxes and transmissions.
SAE 80W-90 API GL-4
Characteristic
Final reduction unit oil
about 500 cc
Locking torques (N*m)
Oil relief screw 15 ÷ 17
Flywheel cover
Removing the hub cover
- Perform the actions described in the section
«Removing the flywheel cover components».
- Unscrew the 13 fixing screws of the flywheel cov-
er.
- Remove the cover.
Engine MP3 400 hpe E5
ENG - 76