J. MultiSat Search
With DiSEqC1.0, you can scan up to four satellites that you have selected.
a. Select <MultiSat search> by using
CH+/–.
b. Select satellites by using VOL+ to view the sub-menu as shown in the fol-
lowing figure.
c. Select satellites by using
CH+/– or PGUP/PGDW. Press OK to view the
sub-menu as shown in the following figure.
d. Press
EXIT, then press OK to search the channels of four satellites continuously.
4.3 Installation Settings
27
MAIN MENU
To Next Page
Loading...