Pilz 772 100 User Manual

Overview
Operating Manual PNOZ m B0
1002660-EN-02
8
– Supply voltage
– Fault at the outputs
– Fault at the inputs
} Backlit display for:
– Error messages
– State of supply voltage
– State of inputs/outputs
– Status information
– Device information
} Test pulse outputs used to monitor shorts across the inputs
} Monitoring of shorts between the safety outputs
} Plug-in connection terminals:
Either spring-loaded terminal or screw terminal available as an accessory (see order
reference)
} Rotary knob for menu control
} Expansion modules can be connected
(please refer to the document "PNOZmulti System Expansion" for details of the type
and number that can be connected)
Chip card
To be able to use the product you will need a chip card.
Chip cards are available with memories of 8 kByte and 32 kByte. For large-scale projects
we recommend the 32 kByte chip card (see Technical Catalogue: Accessories chapter).
2.3

Pilz 772 100 Specifications

General

Brand	Pilz
Model	772 100
Category	Control Systems
Language	English