Need help?Do you have a question about the Pilz PNOZmulti Series and is the answer not in the manual?
General| Mounting | DIN rail |
|---|---|
| Modular Expandability | Yes |
| Series | PNOZmulti |
| Number of Safety Inputs | Configurable |
| Number of Safety Outputs | Configurable |
| Expansion Modules | Yes |
| Communication Interfaces | Ethernet |
| Configuration | Software-configurable |
| Safety Standards | EN ISO 13849-1, IEC 61508 |
| SIL | SIL 3 |
| PL | PL e |
| Supply Voltage | 24 V DC |
| Operating Temperature | -20 °C to +60 °C (depending on the module) |
Specifies the PNOZ mc7p's application as a CC-Link expansion module for PNOZmulti safety circuits.
Covers requirements for qualified personnel, warranty, disposal, and essential safety rules.
Provides instructions for mounting, ventilation, earthing, and environmental considerations in control cabinets.
Guides on how to connect the PNOZ mc7p to the PNOZmulti base unit and other expansion modules.
Covers wiring standards, copper wiring, earthing connections, and power supply requirements.
Details the CC-Link interface pinout and output communication assignments.
Instructions for updating the system project after adding an expansion module.
To Next Page
