Need help?Do you have a question about the Pilz PNOZ mo4p and is the answer not in the manual?
General| Number of Inputs | 4 |
|---|---|
| Number of Outputs | 4 |
| Supply Voltage | 24 V DC |
| Dimensions | 22.5 x 120 x 100 mm |
| Safety Inputs | 4 |
| Number of Safety Outputs | 4 |
| Category | 4 |
| PL e | Yes |
| SILCL 3 | Yes |
| Response Time | 20 ms |
| Stop Category | 0 |
| Number of Test Outputs | 0 |
| Rated Voltage | 24 V DC |
| Protection Class | IP20 |
| Weight | 200 g |
| Operating Temperature | -20°C to +55°C |
Details the intended applications for the PNOZmulti system and the expansion module, including E-STOP and safety circuits.
Covers safety assessment, qualified personnel, warranty, liability, and disposal requirements for safe operation.
Describes the relay's safety features like redundancy, self-monitoring, and protective separation.
Provides instructions for installing the control system in a control cabinet, including mounting and environmental considerations.
Instructs on updating the PNOZmulti system with a modified project after connecting new modules.
Describes how to perform function tests on relay outputs to ensure correct opening of safety contacts.
Details utilization categories, current/power ratings for safety contacts under AC15 and DC13.
Provides safety characteristic data (PL, SIL) for different operating modes and standards.
Presents graphs showing the service life of relay contacts based on switching current and voltage/load types.
To Next Page
