Pilz PNOZ mo4p - 2 Overview; Scope; Unit Features

Overview
Operating Manual PNOZ mo4p
20942-EN-08
| 7
2 Overview
2.1 Scope
} Expansion module PNOZ mo4p
} Jumper
2.2 Unit features
Application of the product PNOZ mo4p:
Expansion module for connection to a base unit from the configurable control system
PNOZmulti
The product has the following features:
} Positive-guided relay outputs:
4 safety outputs
Depending on the application, up to PL e of EN ISO 13849-1 and up to SIL CL 3 of EN
IEC 62061
} Can be configured in the PNOZmulti Configurator
} Status indicators
} Max. 6 PNOZ mo4p units can be connected to the base unit
} Plug-in connection terminals:
Either spring-loaded terminal or screw terminal available as an accessory (see Order ref-
erences for accessories).
} Coated version:
Increased environmental requirements (see Technical details [ 20])