Pilz PNOZ mc1p - Page 15

Technical details
Operating Manual PNOZ mc1p
20879-EN-09
| 15
Environmental data 773700 773705
Storage temperature
In accordance with the standard EN 60068-2-1/-2 EN 60068-2-1/-2
Temperature range -25 - 70 °C -25 - 70 °C
Climatic suitability
In accordance with the standard EN 60068-2-30, EN 60068-2-78 EN 60068-2-30, EN 60068-2-78
Humidity 93 % r. h. at 40 °C 93 % r. h. at 40 °C
Condensation during operation Not permitted Short-term
EMC EN 61131-2 EN 61131-2
Vibration
In accordance with the standard EN 60068-2-6 EN 60068-2-6
Frequency 10 - 150 Hz 10 - 150 Hz
Acceleration 1g 1g
Corrosive gas check
SO2: Concentration 10ppm,
duration 10days, passive – DIN V 40046-36
H2S: Concentration 1ppm, dur-
ation 10days, passive – DIN V 40046-37
Shock stress
In accordance with the standard EN 60068-2-27 EN 60068-2-27
Acceleration 15g 15g
Duration 11 ms 11 ms
Max. operating height above sea
level 2000 m 2000 m
Airgap creepage
In accordance with the standard EN 61131-2 EN 61131-2
Overvoltage category III III
Pollution degree 2 2
Rated insulation voltage 30 V 30 V
Protection type
In accordance with the standard EN 60529 EN 60529
Mounting area (e.g. control cab-
inet) IP54 IP54
Housing IP20 IP20
Terminals IP20 IP20
Mechanical data 773700 773705
Mounting position horizontally on mounting rail horizontally on mounting rail
DIN rail
Top hat rail 35 x 7,5 EN 50022 35 x 7,5 EN 50022
Recess width 27 mm 27 mm
Material
Bottom PPO UL 94 V0 PPO UL 94 V0
Front ABS UL 94 V0 ABS UL 94 V0
Connection type Spring-loaded terminal, screw
terminal
Spring-loaded terminal, screw
terminal