Pima FORCE Series - Chap. 5 Bypass Zones; 5.1 How to bypass on-the-fly; 5.2 How to bypass before arming

3: System Programming
PIMA Electronic Systems 15
3.3 The technician menu
The technician menu is divided into 2 sub-menus: System Configuration, and Tests &
Diagnostics; see below.
3.3.1 System Configuration
The System Configuration menu includes the sub-menus listed in the next table:
Menu
Parameters
 Peripherals
Zone and output expanders, keypads, tamper switches, and EOL
resistors.
 Zones
Zone and zone type definitions, copy zones.
 Outputs
Control panel and expanders’ relay outputs.
 CMS & Communications
CMS 1-2 definitions, PIMA cloud, and radio report codes.
 Faults
System responses to faults and entering false code.
 Timers & Counters
Programmable output types and other timers
 General Settings
System name, service provider, Master technician code, and
other parameters.
 Reset to Defaults
Partial or full system reset
3.3.2 Tests & Diagnostics
See chapter 12, on page 37.