Black plate (2,1)
Thank you for buying this Pioneer product.
Please read through these instructions so you will know how to operate your model
properly. After you have finished reading the instructions, keep this document in a
safe place for future reference.
Important
The screens shown in the examples may differ
from actual screens, which may be changed
without notice for performance and function
improvements.
Introduction
Manual overview 9
– How to use this manual 9
– Conventions used in this manual 9
– Terms used in this manual 9
Notes on internal memory 10
– Before removing the vehicle
battery 10
– Data subject to erasure 10
– Resetting the microprocessor 10
Basic operation
Checking part names and functions 11
Remote control 12
Use and care of the remote control 13
– Installing the battery 13
Notes on using the LCD panel 13
Adjusting the LCD panel angle 13
Inserting/ejecting/connecting media 14
– Inserting and ejecting a disc 14
– Inserting and ejecting an SD memory
card 14
– Connecting and disconnecting an
iPod 15
– Plugging and unplugging a USB
storage device 15
Startup and termination 15
On first-time startup 16
Regular startup 16
– A message about the map
database 16
Turning off the display 16
How to use the screens 18
– Switching screens using the touch
panel keys 18
– Switching screens using the hardware
buttons 19
Supported AV source 20
Displaying the AV operation screen 20
– Selecting a front source on the AV
source selection screen 21
– Selecting a front source on the source
list 21
– Selecting a rear source 21
Turning off the AV source 21
Changing the display order of source
icons 21
Changing the display order of source
keys 22
Using the touch panel 22
– Using the common touch panel
keys 22
– Operating list screens 22
– Operating the time bar 23
– Operating the on-screen keyboard 23
On first-time startup of the navigation
system 23
How to use the Navigation menu screen
Operating the Navigation menu screen 25
How to use the map
How to read the Map screen 26
Frequently shown route events 26
Seeing the current position on the map 27
Browsing the data field 27
Configuring the driving display 28
Operating the Map screen 28
– Changing the scale of the map 28
– Smart Zoom 29
– Switching between 2D, 3D, and 2D
North up views 29
<CRB4349-A>2
Contents
Engb
2
To Next Page
Loading...
