What to do if Pioneer CDJ-1000MK2 disc doesn’t eject?
If the disc doesn't eject from your Pioneer CD Player, there are a couple of things to check: * First, ensure that the power plug is properly connected to the wall outlet. * Second, verify that the EJECT UNLOCK/LOCK button is set to the UNLOCK position. If it's locked, switch it to the unlock position before pressing the EJECT button.
Why Pioneer CDJ-1000MK2 play doesn’t commence?
If play doesn't start on your Pioneer CD Player even after inserting a disc, it might be because the auto cue function is enabled. To resolve this, hold down the TIME MODE/AUTO CUE button for at least 1 second to turn off the A. CUE function.
Power| power requirements | AC 120 V, 60 Hz |
|---|---|
| power consumption | 33 W |
Operating Environment| operating temperature | +5 ˚C – +35 ˚C |
|---|---|
| operating humidity | 5% – 85% |
Audio Specifications| frequency response | 4 Hz – 20 kHz |
|---|---|
| signal-to-noise ratio | 115 dB or more (JEITA) |
| distortion | 0.006% (JEITA) |
Weight and Dimensions| weight | 4.2 kg (9.26 lb) |
|---|---|
| dimensions | 320 (W) × 370 (D) × 105 (H) mm |
Warning to prevent electric shock by not removing covers.
Instruction to refer servicing to qualified personnel.
Conditions under which the product requires servicing.
Warning against exposing the apparatus to rain or moisture.
Warning regarding eye hazard from optical instruments.
Warning about lead exposure from product cords and accessories.
Important guidelines for safe handling and placement of the player.
Detailed description of the player's controls and displays.
Procedure for ejecting a disc when the normal eject button fails.
Description of the large diameter Jog dial for enhanced handling.
Feature allowing playback manipulation via Jog dial touch and rotation.
Instant start from pre-selected hot cue points.
Simplified setting and releasing of loops.
Connecting the player to DJ mixers for sound and control.
Connecting units for automatic alternate playback.
Connecting to mixers using Line In or AUX terminals.
Connecting to a stereo amplifier's AUX input.
Connecting to digital audio devices with digital inputs.
Configuring the rear panel digital output mode switch for DJ or Normal use.
Instructions for connecting the power cord to the unit and outlet.
Overview of the top panel controls and their functions.
Buttons for setting and activating hot cue points.
Step-by-step guide for inserting a disc into the player.
Introduction to DJ player operations.
Steps to begin playback of a disc.
How to set and store cue points.
Detailed steps for setting cue points in CDJ mode.
Detailed steps for setting cue points in VINYL mode.
Setting a cue point during playback.
Adjusting playback speed using the tempo control.
Changing tempo without affecting pitch.
Various functions of the Jog dial.
Using the Jog dial for scratch play.
Step-by-step guide for mixing two tracks.
Using cross fader for starting playback.
Detailed explanation of scratch play using the Jog dial.
Instructions on how to perform a "spin" effect with the Jog dial.
Using the brake function with the Jog dial.
Setting and starting hot cue points.
Procedure for storing hot cue points.
How to activate stored hot cue points.
Functionality for creating and playing loops.
Steps to set the start and end points of a loop.
Playing tracks in reverse.
Using fader start with DJ mixers.
Setting up relay play between two players.
Storing and managing cue/loop points in internal memory.
Procedure for saving cue points to memory.
Using MMC cards for storing cue/loop points.
Storing loop points onto a Multimedia Card.
Troubleshooting steps for disc ejection issues.
Solutions for playback not starting.
Addressing issues where playback stops unexpectedly.
Troubleshooting steps for no audio output.
Solutions for distorted sound or noise.
Explains error codes and their recommended solutions.
Technical specifications for the audio output, including frequency response, S/N ratio, and distortion.
To Next Page
