To Next PageTo Next Page
Need help?Do you have a question about the Pioneer CT-1160R and is the answer not in the manual?
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Tape Speed | 4.76 cm/s |
| Heads | 1 x record/playback, 1 x erase |
| Tape Type | Type I, CrO2, Metal |
| Total Harmonic Distortion | 1.0% |
| Type | Single Compact Cassette Deck |
| Motor | DC servo motor |
| Noise Reduction | Dolby B |
| Dimensions | 420 x 122 x 290 mm |
Details heads, motor, frequency response, S/N ratio, and distortion.
Lists key operational features like auto-reverse and timer functions.
Covers power requirements, consumption, dimensions, and accessories.
Identifies buttons, switches, indicators, and level meters on the front.
Describes tape selector, play mode, and recording operation switches.
Instructions for removing the tape transport unit and front panel.
Steps for replacing capstan motor and tape head assembly.
Identifies parts on the front panel for different models.
Identifies parts on the rear and top panels of the unit.
Lists various parts like PC boards, semiconductors, and other components.
Details coils, resistors, switches, capacitors, and appearance of transistors/ICs.
Shows wiring diagrams for main, control, and timer units.
Illustrates connections for power supply, indicator, and tape transport units.
Provides exploded diagrams and part lists for the tape transport unit.
Lists part numbers and descriptions for various components.
Itemizes packing materials and operating instructions included.
Procedures for adjusting tape speed and transport mechanisms.
Lists required conditions and types of electrical adjustments.
Covers head azimuth, playback equalization, levels, and recording adjustments.
Outlines safety checks, including leakage current measurement.
Warns about using correct replacement parts and safety characteristics.
Highlights variations in parts for different model types.
Instructions for setting voltage for specific models.
