Pioneer GM-3500T User Manual

----------------------
;Jlltu.
ll
m
BRIDGEABLE
TWO-CHANNEL POWER AMPLIFIER
AMPLIFICATEUR
DE
PUISSANCE
PONTABLE A DEUX CANAUX
AMPLIFICADOR
DE
POTENCIA
DE DOS CANALES
PUENTEABLE
GM-3500T
Owner's
Manual
Mode
d'emploi
Manual
de
instrucciones
:::::s
cc
fA
::::r
.,
...
S»
:::::s
&.(")
!.
fA
m
fA
"C
S»
:::II
0

Pioneer GM-3500T Specifications

General

Channels	2
Total Harmonic Distortion (THD)	0.05%
Frequency Response	10 Hz - 50 kHz
Bass Boost	0 - 12 dB
Signal to Noise Ratio	100dB
Crossover	High/Low

Summary

Before You Start

Ear Safety Guidelines

Advice on listening at safe levels to protect hearing and guidelines for safe listening practices.

Connecting and Installing the Amplifier

Detailed warnings and cautions for connecting and installing the amplifier safely and correctly.

Setting the Unit

Gain Control

Setting Gain Properly

Guidelines for setting the gain control correctly to prevent protection circuit activation and ensure optimal output.

Connecting the Units

Before Connecting Amplifier

Important warnings and cautions regarding wiring, power supply, and component protection during installation.

Bridged Mode Connection

Instructions and diagrams for connecting speakers in bridged mode for optimal power output.

Connecting Speakers

Guides for connecting speakers for two-channel (stereo) and one-channel (mono) output modes.

Speaker Input Wire Connections

How to connect the car stereo's speaker output wires to the amplifier's speaker input terminals.

Power Terminal Connection

Detailed steps for connecting the battery wire, ground wire, and system remote control wire.

Speaker Output Terminal Connections

Instructions on stripping wires, attaching lugs, and connecting speaker wires to the output terminals.

Installation

Before Installing Amplifier