How to fix ‘iPod/USB Error 2 (I/U ERR2)’ on Pioneer HTP-072?
To fix the ‘iPod/USB Error 2 (I/U ERR2)’ error on your Pioneer Home Theater System, first, switch off the receiver and reconnect the iPod. If the problem continues, try resetting your iPod.
Why is the OSD screen not displayed on my Pioneer HTP-072?
The OSD screen (Home Menu, etc.) will not appear if you have connected using the HDMI output to your TV. Use composite connections when setting up the system.
Why is there no sound on my Pioneer HTP-072?
If there is no sound coming from your Pioneer Home Theater System, it could be due to a few reasons. Check the speaker wire connections to ensure they are correctly connected. Also, verify that the receiver is turned on and that the volume control is not set to zero. If the volume is at zero, slowly increase it.
What to do if Pioneer HTP-072 Home Theater System speakers stop producing sound suddenly (S-11A-P)?
If your Pioneer Home Theater System speakers (S-11A-P) suddenly stop producing sound, it's possible that an excessively large signal was input, which activated the automatic protection circuit. To resume normal speaker output, try turning the volume down.
Why is the sound distorted on my Pioneer Home Theater System?
Sound distortion on your Pioneer Home Theater System typically occurs due to an extreme signal condition. Reduce the receiver’s output level by adjusting the volume, bass control, or bass boost to a lower level.
General| Disc types supported | No |
|---|---|
| Optical disc player type | - |
| Deep color support | Yes |
| Apple docking compatibility | iPad, iPhone, iPod |
| Video formats supported | Not supported |
| Audio decoders | Dolby Digital, Dolby Digital Plus, Dolby Pro Logic II, Dolby TrueHD, DTS, DTS 96/24, DTS Neo:6, DTS-HD Master Audio |
| RMS rated power | 600 W |
| Audio output channels | 5.1 channels |
| Supported radio bands | AM, FM |
| Front speakers RMS power | 100 W |
| Product color | Black |
| HDMI in | 4 |
| USB version | 2.0 |
| Composite video in | 2 |
| Number of HDMI outputs | 1 |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.45 W |
| Power consumption (typical) | 185 W |
Weight and Dimensions| Main unit weight | 7500 g |
|---|---|
| Subwoofer weight | 5300 g |
| Center speaker weight | 1000 g |
| Satellite speaker weight | 600 g |
| Main unit dimensions (WxDxH) | 435 x 362.5 x 168 mm |
| Subwoofer dimensions (WxDxH) | 230 x 358 x 418 mm |
| Front speaker dimensions (WxDxH) | 106 x 106 x 116 mm |
| Center speaker dimensions (WxDxH) | 270 x 106 x 100 mm |
Important safety notes regarding electrical shock, fire hazards, and proper usage.
Guidelines for ensuring adequate airflow around the unit to prevent overheating and fire hazards.
Specifies the recommended temperature and humidity range for optimal receiver performance.
Instructions for the proper collection and disposal of electrical equipment and used batteries in the EU.
Important safety precautions for handling and using the power cord to prevent hazards.
Warning to store small parts away from children to prevent accidental swallowing.
Lists the accessories included with the receiver to ensure everything is present.
Provides instructions and precautions for placing and installing the receiver in a suitable location.
Outlines the sequence of steps for connecting components and configuring the receiver.
Details the INPUT SELECTOR dial, SPEAKERS, DIMMER, and DISPLAY buttons.
Explains the BAND, TUNER EDIT, TUNE, PRESET buttons and the remote sensor.
Describes the HDMI, iPod/iPhone indicators, MASTER VOLUME dial, and STANDBY/ON button.
Explains buttons for selecting surround sound modes like AUTO SURROUND, STREAM DIRECT, STEREO, and ADVANCED SURROUND.
Details the ECO mode button, iPod/iPhone DIRECT CONTROL, and the iPod/iPhone terminal.
Explains indicators for PHASE, AUTO, Tuner (RDS, ST, TUNE, PRESET, MEM, kHz/MHz), Speaker, and Sleep timer.
Describes indicators for DTS and Dolby Digital signals, as well as ADV.S., DIGITAL, HDMI, and DIR.
Explains SLEEP, RECEIVER, INPUT SELECT, SIGNAL SEL, and sound control buttons.
Details buttons for listening modes and input function buttons.
Describes HOME MENU, RETURN, TUNER controls, and iPod CTRL buttons.
Explains component control buttons (BASS, TRE) and TV control buttons (INPUT, CH, VOL).
Details the VOLUME, MUTE, and DISP buttons.
Instructions for loading batteries and information on the remote control's operating range.
Provides advice on optimal speaker placement for the best surround sound experience.
Illustrates the recommended positioning for a 5.1 channel speaker setup.
Details how to connect the front, center, surround speakers, and subwoofer to the receiver terminals.
Step-by-step guide on how to connect bare speaker wires to the receiver terminals.
Important safety warnings regarding hazardous voltage at speaker terminals and proper wire insertion.
Advice on routing cables to prevent humming noise caused by magnetic fields.
Explains the benefits of HDMI cables for transmitting video and sound simultaneously.
Details the capabilities of HDMI connections, including HDCP, 3D, Deep Color, and audio formats.
Instructions for connecting analog audio components using stereo RCA phono cables.
Guidance on using coaxial digital audio or optical cables for digital component connections.
Explains video output capabilities and limitations, especially regarding HDMI and composite connections.
Details how to connect components with HDMI/DVI outputs to the receiver and TV.
Explains the requirements and settings for using the HDMI Audio Return Channel function.
Notes on OSD visibility and the use of composite cables for setup when using HDMI.
Instructions for setting up analog audio input to hear TV sound through the receiver.
Guidance on connecting components using optical or coaxial digital audio cables.
Instructions for connecting the supplied AM loop and FM wire antennas.
How to connect an external FM antenna for better reception.
Method for connecting an external antenna to improve AM reception.
Steps to connect an iPod or iPhone to the receiver for playback and control.
Instructions for connecting a USB device for two-channel audio playback.
Steps for connecting the receiver to the AC power outlet after all components are connected.
Safety advice on handling the power cord to prevent electrical shock or fire.
Information about the HDMI initialization that occurs after connecting to AC power.
Guide for initial system setup using the TV's on-screen display (OSD).
How to adjust the TV system setting (PAL or NTSC) if the OSD is not displayed correctly.
Instructions for disabling the automatic power-off function for European and U.K. models.
Steps to play audio or video from connected source components like DVD players.
How to choose the correct audio input signal (HDMI, Analog, Digital) for each source.
Lists compatible digital audio formats for playback via optical, coaxial, and HDMI connections.
Details on connecting an iPod/iPhone and important notes regarding compatibility and usage.
Explains how to use the remote control for basic playback of music from iPod or USB devices.
Instructions for browsing and selecting songs on an iPod using the receiver's interface.
Steps and important notes for playing audio files from a USB mass storage device.
Information on compatible USB file formats, error messages, and important notes for USB playback.
How to tune into FM and AM radio stations using automatic and manual methods.
How to adjust the tuning step for radio stations in Australia and New Zealand.
Tips for improving FM sound quality by switching to mono reception.
Steps to store favorite radio stations and assign custom names for easy recall.
Explains Radio Data System (RDS) and its features for FM radio.
How to search for radio stations broadcasting specific program types.
How to view RDS information such as program service name, radio text, and program type.
Guide to choosing different listening modes for various audio sources and speaker setups.
Explains the AUTO SURROUND feature for automatic source detection and playback.
Details various surround sound modes for stereo and multichannel sources.
Explains Stream Direct modes for pure audio reproduction and front stage surround effects.
How to restore compressed audio quality and optimize sound phase for clarity.
Adjustments for Sound Retriever, Dual Mono, LFE Attenuate, and SACD Gain.
Options for HDMI audio routing, fixed PCM, Auto Delay, and Dynamic Range Control.
Settings for Midnight/Loudness modes and Audio Delay adjustments.
Adjustments for extending stereo image and refining center channel focus.
Details on settings for Panorama, Center Image, and specific mode compatibility notes.
How to access and navigate the receiver's main setup menu.
Steps for setting up speaker size, number, and type for optimal surround sound.
How to configure subwoofer output and set the crossover frequency for bass management.
Procedures for manually or automatically adjusting individual speaker channel levels.
How to set speaker distance for surround effect and adjust channel levels using test tones.
Configuring analog input assignments and setting the automatic power-off timer.
Accessing and configuring HDMI settings.
How to enable and use the HDMI ARC function for TV audio return.
Important considerations and potential issues when using the ARC function.
Common issues like no power, receiver switching off, and HDMI indicator problems.
Troubleshooting steps for scenarios with no sound, no image, or no sound from specific speakers.
Tips for improving radio reception and resolving noise issues.
Troubleshooting for remote control operation, dark display, and iPod/iPhone recognition problems.
Solutions for no picture/sound, OSD display issues, and HDMI connection configurations.
Explanations and solutions for common iPod/USB error messages.
Notes on "Made for iPod/iPhone" certification and compatibility.
Procedures for resetting the unit to factory defaults and cleaning the exterior.
Detailed specifications including audio, digital I/O, power, dimensions, and furnished parts.
To Next Page
