Do you have a question about the Pioneer PD-M403 and is the answer not in the manual?
power requirements US model | AC 120V, 60 Hz |
---|---|
power requirements UK and Australian models | AC 220-240 V, 50/60Hz |
power consumption US model | 10 W |
power consumption UK and Australian models | 12 W |
operating temperature | +5°C to +35°C |
---|---|
operating temperature (Fahrenheit) | +41°F to +95°F |
frequency response | 2 Hz - 20 kHz |
---|---|
S/N ratio | 98dB or more |
dynamic range | 95dB or more |
harmonic distortion | 0.005% or less |
output voltage | 2.0 V |
wow and flutter | 0.001% W.PEAK or less |
channels | 2-channel (stereo) |
weight | 3.7 kg |
---|---|
dimensions | 420 x 294 x 105 mm |
Leakage current check and product safety notice.
Importance of safety-related characteristics of components.
Notes regarding parts marked "NSP", "A", and ".
List of parts with Mark No., Description, and Part No. for packing.
List of exterior parts with Mark No., Description, and Part No.
Detailed exploded view of the multi-mechanism assembly.
Comprehensive list of components for various internal assemblies.
Functional block diagram of the CD player's signal flow.
Oscilloscope waveforms for various test points and modes.
Notes on ordering parts, component changes, and symbols.
Notes on part numbers, PCB symbols, and schematic symbols.
Notes on parts marked "NSP", "A", and ". Resistor code conversion.
Lists of assemblies, semiconductors, and coils for the mother board.
Procedures, instruments, and tools for adjustment.
How to enter, operate, and exit test mode for adjustments.
Focus offset, tracking error, tilt, RF level, and loop gain adjustments.
Pin arrangement, block diagram, and pin functions for the D/A converter IC.
Pin functions, I/O, reset, potential, and control modes for the system control IC.
Pin arrangement, block diagram, and pin functions for the EFM demodulator IC.
Pin connection, grid assignment, and anode connection for the FL display.
Comparison of miscellaneous parts across different model variations.
Identification of front panel controls and indicators.
Diagram and list of buttons for the remote control unit.
Type, power, temperature, dimensions, and weight.
Frequency response, S/N ratio, distortion, output voltage, wow/flutter.
Description of output terminals and included accessories.