Pioneer PDP-4214HD

Check the condition of connectin of the input CVBS signal.
Check the condition of soldering state in CVBS & input part
Check the short point in signal line.
Check for short circuits between each power terminal and the ground.
5. No Video Signal (CVBS)
Preliminary Checkpoints
#119
At U711
In DTT&Analog Board
#8(1),15(2),22(3)
at U706
in DTT & Analog B/D
No CVBS
signal (SMPTE Color Bars)
Dose the signal
appear at PR22,24
25,26 In DTT&Analog
B/D
Dose the signal
appear at
PR29,31,34,35,38,39
In digital B/D
Check the LVDS Cable
and JP500
in Digital B/D
Change Digital B/D
Waveform 15
Waveform 14
Waveform 11
Waveform 12
Check CVBS input
part
Check U706 &
input part of U711
Check U16 and
Y2 and related circuit
Check U20 and
X2 and related circuit
Change the LVDS Cable
&LVDS chip
NG
(1):VIDEO01
(2):VIDEO01
(3):VIDEO01
NG
NG
NG
NG
40