Check the condition of connectin of the input CVBS Audio R/L.
Check the condition of soldering state in CVBS Audio R/L & input part
Check the short point in signal line.
Check for short circuits between each power terminal and the ground.
8. No Sound in CVBS (Sine wave input)
Preliminary Checkpoints
#56,57
At U751
In DTT&Analog Board
#9,11(1),16,18(2),23,25(3)
at U706
in DTT & Analog B/D
No Sound in
CVBS Audio R/L
#11,15
At U200
In Audio Amp Board
#28,31,27,24
At U200
Change Speaker
Waveform 20
Waveform 19
Waveform 18
Waveform 21
Check CVBS Audio input
part
Check U706 &
input part of U751
Check U751 and
Y800 and related circuit
Check U200 and
X2 and related circuit
NG
NG
NG
NG
(1):VIDEO01 Audio
(2):VIDEO01 Audio
(3):VIDEO01 Audio
To Next Page
Loading...
