10Enjoying through External Equipment
English
39
En
Connecting to the Component Input
L-AUDIO-R Y
L-AUDIO-R Y
CB/PB
CB/PB
CR/PR
CR/PR
COMPONENT 2
COMPONENT 1
1
Connect the video cable to the VIDEO-Y/PB/PR
(COMPONENT 1 or COMPONENT 2) input jacks on the
Plasma Display and to the video output jacks on the
required equipment.
• Depending on the manufacturer, the Y/PB/PR jacks may be
identified as Y/PB/PR, Y/B-Y/R-Y, or Y/CB/CR.
•Refer to your DVD player instruction manual for the signal type.
2
Connect the audio cable to the AUDIO-L/R
(COMPONENT 1 or COMPONENT 2) input jacks on the
Plasma Display and to the audio output jacks on the
required equipment.
3
Turn the Plasma Display on, then press the INPUT
button to select COMPONENT 1 or COMPONENT 2.
Audio Cable
(commercially available)
Component Video Cable
(commercially available)
VCR
DVD Player
Set Top Box or
other audio-
visual equipment
11-PDP42A3HD-Eng (38-41) 5/17/05, 7:10 PM39
To Next Page
Loading...
