To Next Page
A
Amanda MoralesSep 9, 2025
Why are the front panel buttons not working on my Pioneer PDP-42MVE1 Monitor?
- BBianca BergSep 9, 2025
If the front panel buttons on your Pioneer Monitor aren't working, the KEY Lock might be on. Set the KEY Lock to OFF.
Why are the front panel buttons not working on my Pioneer PDP-42MVE1 Monitor?
If the front panel buttons on your Pioneer Monitor aren't working, the KEY Lock might be on. Set the KEY Lock to OFF.
Why does my Pioneer Monitor emit a crackling sound?
If your Pioneer Monitor emits a crackling sound, it is caused by the cabinet reacting to changes in temperature. This will not affect performance.
What does it mean when the STANDBY/ON indicator is red on my Pioneer PDP-42MVE1 Monitor?
If the STANDBY/ON indicator on your Pioneer Monitor is lighted in red, the horizontal and / or vertical sync signal is not present when the Intelligent Power Manager control is on. Check the input signal.
Why is the STANDBY/ON indicator blinking red on my Pioneer PDP-42MVE1 Monitor?
If the STANDBY/ON indicator on your Pioneer Monitor is blinking in red, the temperature inside the main unit has become too high and has activated the protector. Switch off the power of the main unit and wait until the internal temperature drops.
What should I do if the STANDBY/ON indicator is blinking green and red, or green, on my Pioneer PDP-42MVE1 Monitor?
If the STANDBY/ON indicator on your Pioneer Monitor is blinking in green and red, or green, switch off the power of the main unit.
General| Screen Size | 42 inches |
|---|---|
| Display Type | Plasma |
| Resolution | 1024 x 768 |
| Brightness | 1000 cd/m² |
| Contrast Ratio | 3000:1 |
| Aspect Ratio | 16:9 |
| Viewing Angle | 160 degrees |
| Input Ports | Component, S-Video, Composite |
| Dimensions (W x H x D) | 98 mm |
