Selection of CONVENTIONAL TV channels is not possible with the remote
control's CH(+/-) channel selection button.
Has the desired CONVENTIONAL TV channel been set to Delete with
Channel ADD/DEL ?
If the desired broadcast has been set to Delete with Channel ADD/DEL, channel selection is not
possible with the remote control's CH (+/-) channel selection button.
Set the desired CONVENTIONAL TV channel to Add with Channel ADD/DEL.
10
2
3
4
Select "Channel Setup" using
the buttons, and
press .
Select "Channel ADD/DEL"
using the buttons,
and press .
Select "Antenna" using the
buttons, and select
the desired antenna using
the buttons.
Select "Channel" using the
buttons, and select
the desired channel using the
buttons.
Select "Add/Delete" using the
buttons, and select
"Add" using the
buttons.
Press the button to
cancel the HOME MENU.
5
6
7
Problem
Possible Cause
Solutions
Troubleshooting
CONVENTIONAL TV
1
Press button on the
remote control to display the
HOME MENU.
Select "Setup" using the
buttons, and press
.
Changing the setting
2
1
6
7
To Next Page
Loading...
