The unit's protection circuitry may be operating.
Press the Plasma Display and Media Receiver's POWER button to switch power
off, and wait for one minute or more before switching power on again.
If that doesn't solve the problem, be sure to disconnect the unit from the power outlet before
contacting the store where the unit was purchased. If you do not know how to contact the store or the
store is not nearby, consult with PIONEER Electronics (USA) Inc. or PIONEER Electronics of Canada,
Inc. (Refer to P.12)
6
Problem
Possible Cause
Solutions
Troubleshooting
No power.
Power is cut off.
(Continued from P.5)
(Plasma Display and Media Receiver indicators rapidly flash green and red.)
STANDBY indicator
POWER ON indicator
POWER button
STANDBY indicator
POWER ON indicator
POWER button
Media Receiver
Plasma Display (front view, bottom left)
To Next Page
Loading...
